Συστήματα Ελέγχου Σκληρότητας Υλικών

Ο έλεγχος σκληρότητας είναι καθοριστικός για τον προσδιορισμό των μηχανικών ιδιοτήτων των υλικών. Τα συστήματα μικροσκληρότητας και μακροσκληρότητας με μεθόδους Vickers και Rockwell εξασφαλίζουν ακριβείς μετρήσεις σε εργαστηριακές και βιομηχανικές εφαρμογές.

 

Περιγραφή

Material Hardness Testing Equipment

Precision Hardness Testing for Reliable Material Evaluation

 

Hardness testing is essential for determining the mechanical properties of materials and evaluating their resistance to deformation. Metkon offers a range of micro and macro hardness testing systems designed for accurate and reliable measurements in both laboratory and industrial environments.

Vickers Hardness Testing provides precise measurements across a wide range of materials and is particularly suitable for applications requiring high accuracy, from microhardness to macrohardness testing. Rockwell Hardness Testing offers a fast and reliable method, widely used in industrial applications, production lines and quality control processes.

To support accurate measurements and reliable operation, reference test blocks with high precision are available for the calibration of hardness testers, together with a selection of accessories that facilitate testing procedures and meet different application requirements.

Vickers Hardness Testers

The DUROLINE Series covers three Vickers hardness testing ranges to accommodate different testing requirements. The DUROLINE M1, M2 and M4 models operate from 10 gf to 1 kgf, making them particularly suitable for testing thin films and small components. The DUROLINE LV1, LV2 and LV4 models cover test forces from 300 gf to 10 kgf, providing high-precision measurements across a wide range of materials. For higher test forces, the DUROLINE V1 operates from 1 kgf to 30 kgf, offering a solution for applications requiring higher-load Vickers hardness testing. All models combine precision measurement with user-friendly operation and advanced features.

10 GF to 1 KGF

DUROLINE M1
Vickers/Knoop Micro-Hardness Tester

Test loads 10 – 1000 gf suitable for testing in compliance with standart ISO-6507 and ASTM E-384

DUROLINE M2
Vickers/Knoop Micro-Hardness Tester with motorized spindle Z-axis up/down movement and auto-focus module

Test loads 10 – 1000 gf suitable for testing in compliance with standart ISO-6507 and ASTM E-384

DUROLINE M4
Vickers/Knoop Micro-Hardness Tester with motorized spindle Z-axis up/down movement and auto-focus module and large motorized XY stage 100×150 mm

Test loads 10 – 1000 gf suitable for testing in compliance with standart ISO-6507 and ASTM E-384

300 GF to 10 KGF

DUROLINE LV1
Vickers/Knoop Micro-Hardness Tester

Test loads 300gf – 10 kgf suitable for testing in compliance with standart ISO-6507 and ASTM E-384

DUROLINE LV2
Vickers/Knoop Micro-Hardness Tester with motorized spindle Z-axis up/down movement and auto-focus module

Test loads 300gf – 10 kgf suitable for testing in compliance with standart ISO-6507 and ASTM E-384

DUROLINE LV4
Vickers/Knoop Micro-Hardness Tester with motorized spindle Z-axis up/down movement and auto-focus module and large motorized XY stage 100×150 mm

Test loads 300gf – 10 kgf suitable for testing in compliance with standart ISO-6507 and ASTM E-384

1 KGF to 30 KGF

DUROLINE V1
Vickers/Knoop Micro-Hardness Tester 

Test loads 1 kgf – 30 kgf suitable for testing in compliance with standart ISO-6507 and ASTM E-384

The DUROLINE V1 is an automated Vickers hardness tester designed for quality control, research and metallurgical applications. It is suitable for testing steel alloys, metal components, small precision parts, thin materials, wires and coatings, as well as performing case depth measurements (CHD, EHT, NHT) on cross-sections.

Rockwell Hardness Testers

Rockwell Hardness Testing is a fast and reliable method for evaluating material hardness across different Rockwell scales. Widely used in industrial applications, it supports routine hardness testing in production and quality control environments.

DUROLINE R1

The DUROLINE R1 is an automated Rockwell hardness tester designed for quality control, research and metallurgical applications. It is suitable for testing steel alloys, metal components, cylindrical and spherical parts, pipes, rings, gears and crankshafts, as well as performing Jominy tests.

 
 

 

ΠΑΡΟΜΟΙΑ ΠΡΟΪΟΝΤΑ

Καλάθι αγορών
Scroll to Top